|
Specifications of SP-25
Number
of Tubes 25
Length
of Tube 1800 mm
Outer
Tube Diameter 58 mm
Inner
Tube Diameter 47 mm
Glass
Tube Thickness 1.6 mm
Tube
Thermal Expansion 3.3 X 10 -6
oC
Tube
Material Borosilicate Glass 3.3
Absorptive Coating Graded AI-N/AI
Absorptions > 92% (AM 1.5)
Emittance
7 %
(100
oC)
Vacuum
P < 0.005 Pa
Stagnation Temperature < 220
oC
Heat
Loss < 0.8 W/m2.
oC)
Reflector Diffuse flat reflector
The out
cover of the solar connector Aluminum alloy
manifold.
Frame
Aluminum alloy frame
Heat
pipe type Big heat pipe
Fluid
type Glycol solution or pure water
Insulation Polyurethane
Tested
pressure 1.0MPa
Working
pressure <0.6MPa
Daily
efficiency >52%
Collector
Type
Area
(m2)
Vacuum
tube
Qty(pcs)
(mm)2020*2240*155
Length/width/height
(Ft)
6.63X7.35X0.5
Gross
wet
(kg)
TZ58/1800-25R
3.49 25
2020*2240*155 96.1
|
Specifications of GSE
IP-195
Hot Water and
Hot Water Home Heating Systems:
This item is a
complete 40 Gallon Thermosyphon Solar Hot Water
System. It has a 40 Gallon Storage Tank complete
with 24 evacuated tubes.
No
electricity is required - only a water source
for filling the tank. This water source may be
from a well or mains supply and the desired hot
water flow into the house can be achieved either
by natural gravity from tank above or the
additional use of a pressure pump (Solar DC or
Mains AC).
Hot
water output:(40℃) 665L
Available Range: 5-7 people
Gross Weight: 120kg
Aperture Area: 2.93m�
Absorber Area: 1.83m�
Diameter of Tube: Ф58 mm
Length of Tube: 2000 mm
Type of Tube: TYY-AA / TYYMC
Inner/Outer Diameter of Tank:
Ф375/Ф475 mm
Insulating Layer: Foaming
polyurethane, Thickness: 50mm, ρ=36kg/m�,
K=0.0035w/m.k
Outer Tank: Painted
steel-0.4mm/ Stainless steel SUS304-0.4mm
Inner Tank: Stainless steel
SUS304-0.6mm, Argon welding technology
Inlet/Outlet Pipe: 1/2″
Copper coil diameter: 12mm
Copper coil thickness: 1mm
Copper coil length: 35m
Optimal flow rate: 7L/min
Pressure tolerance for copper coil:
Working pressure: 3Pa~6Pa, Testing
pressure: 8Pa.
Sealing Rubber: 110
Methylsilicone Rubber with Vinyl
Dustproof Rubber: EPDM
Tail Stock: ABS Plastic
material
Frame Coated galvanized
steel-1.5mm/ Stainless steel SUS430-1.5mm
Reflector Aluminum component:
AL 99.85% surface oxidation treatment
Frame Angle: 38�/45�
Daily Efficiency: >65%
Heat Loss Coefficient:
9.5w/m�.k
This item is a complete
40 Gallon Thermosyphon Solar Hot Water System.
Get hot water on demand! Low cost, affordable
hot water heating and home hot water heating
systems.
|